 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MURS205T3, MURS210T3 Preferred Device Surface Mount Ultrafast Power Rectifiers Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. http://onsemi.com * * * * Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (0.74 Volts Max @ 2.0 A, TJ = 150C) ULTRAFAST RECTIFIERS 2 AMPERES 50-100 VOLTS Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 95 mg (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * * Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped in 12 mm Tape and Reel, 2500 units per reel Polarity: Polarity Band Indicates Cathode Lead Marking: U2A, U2B SMB CASE 403A x = A (205T3) B (210T3) MARKING DIAGRAM U2x ORDERING INFORMATION Device MURS205T3 MURS210T3 Package SMB SMB Shipping 2500 Tape & Reel 2500 Tape & Reel Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2000 1 September, 2000 - Rev. 0 Publication Order Number: MURS205T3/D MURS205T3, MURS210T3 MAXIMUM RATINGS MURS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Non-Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature Symbol VRRM VRWM VR IF(AV) IFSM 205T3 50 210T3 100 Unit Volts 1.0 @ TL = 150C 2.0 @ TL = 125C 50 Amps Amps TJ *65 to +175 C THERMAL CHARACTERISTICS Thermal Resistance, Junction to Lead (TL = 25C) RJL 13 C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1) (iF = 2.0 A, TJ = 25C) (iF = 2.0 A, TJ = 150C) Maximum Instantaneous Reverse Current (1) (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 150C) Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/s) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/s, Rec. to 1.0 V) (1) Pulse Test: Pulse Width = 300 s, Duty Cycle v 2.0%. vF 0.94 0.74 iR 2.0 50 trr 30 20 tfr 20 ns ns A Volts http://onsemi.com 2 MURS205T3, MURS210T3 10 7.0 5.0 10 7.0 5.0 3.0 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 2.0 175C 100C IF, INSTANTANEOUS FORWARD CURRENT (A) 3.0 2.0 175C 100C 1.0 0.7 0.5 TC = 25C 0.3 0.2 1.0 0.7 0.5 25C 0.3 0.2 0.1 0.07 0.05 0.1 0.07 0.05 0.03 0.02 0.03 0.02 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 vF, INSTANTANEOUS VOLTAGE (VOLTS) vF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage 100 IR, REVERSE CURRENT (A) TJ = 175C 10 IR, REVERSE CURRENT (A) 100 TJ = 175C 10 TJ = 100C 1 TJ = 25C 1 TJ = 100C TJ = 25C 0.1 0.1 0.01 0 20 40 60 80 100 VR, REVERSE VOLTAGE (VOLTS) 0.01 0 20 40 60 80 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 3. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. Figure 4. Maximum Reverse Current* http://onsemi.com 3 MURS205T3, MURS210T3 50 45 C, CAPACITANCE (pF) 40 35 30 25 20 15 10 5 0 0 4 8 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) NOTE: TYPICAL CAPACITANCE AT 0 V = 44 V 50 45 C, CAPACITANCE (pF) 40 35 30 25 20 15 10 5 0 0 4 8 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) NOTE: MAXIMUM CAPACITANCE AT 0 V = 47 V Figure 5. Typical Capacitance IF(AV), AVERAGE FORWARD CURRENT (AMPS) PF, AVERAGE POWER DISSIPATION (WATTS) Figure 6. Maximum Capacitance 10 9 8 7 6 5 4 3 2 1 0 80 90 SQUARE WAVE 100 110 120 130 140 150 160 170 180 dc RATED VOLTAGE APPLIED RqJC = 13C/W TJ = 175C 4 3.5 3 2.5 2 SQUARE WAVE 1.5 1 dc 0.5 0 0 0.5 1 1.5 2 2.5 IF(AV), AVERAGE FORWARD CURRENT (AMPS) TJ = 175C TC, CASE TEMPERATURE (C) Figure 7. Current Derating, Case Figure 8. Power Dissipation http://onsemi.com 4 MURS205T3, MURS210T3 Notes http://onsemi.com 5 MURS205T3, MURS210T3 Notes http://onsemi.com 6 MURS205T3, MURS210T3 Notes http://onsemi.com 7 MURS205T3, MURS210T3 PACKAGE DIMENSIONS SMB CASE 403A-03 ISSUE D S A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. D B C INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59 K P J H ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MURS205T3/D |
Price & Availability of MURS210T3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |